netsh

#Enable File And Printer Sharing In Windows 10 Without Using The netsh Command in PowerShell

#It is as simple as enabling the pre-configured rule in Windows Firewall to enable File and Printer Sharing in Windows 10 but using netsh is the old fashion way.

#Run this command in an elevated PowerShell prompt and you are done.

Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'\|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#The Long Story…

#Allow File and Printer Sharing services through the Windows Firewall to access shared information and to share information of your own. These commands all work in both in PowerShell and PowerShell Direct.

#Get Firewall rules for File and Printer Sharing

#This command shows the individual rules and the network connection profiles that are explicitly enabled and disabled for the File and Printer Sharing services.

Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'\|select Name,DisplayName,Enabled,Profile\|ft -a

#Enable File and Printer Sharing for Private and Domain network profiles

#Enable the File and Printer Sharing services for the Private and Domain network connection profiles by applying the preconfigured Windows Firewall group rule called File and Printer Sharing by typing this:

Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'\|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#▲That is what it looks like under Advanced Sharing Settings when the File and Printer Sharing firewall rule is enabled.

#Set Network Connection Profile to `Private``.`

#I set the variable $InterfaceAlias to automatically query my primary network interface or NIC. The -NlMtuBytes 1500 switch is what makes it work. If you have changed the Maximum Transmission Unit (MTU) from the defaults then this command will need to be modified:

$InterfaceAlias = (Get-NetIPInterface -AddressFamily IPv4 -ConnectionState Connected -NlMtuBytes 1500 -Verbose) #this works for me to automatically identify my nic - mtu 1500 may vary
Set-NetConnectionProfile -InterfaceIndex $InterfaceAlias.ifIndex -Ne

1 2	$InterfaceAlias = (Get-NetIPInterface -AddressFamily IPv4 -ConnectionState Connected -NlMtuBytes 1500 -Verbose) #this works for me to automatically identify my nic - mtu 1500 may vary Set-NetConnectionProfile -InterfaceIndex $InterfaceAlias.ifIndex -Ne

#Disable File and Printer Sharing on all network profiles

Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'|Set-NetFirewallRule -Enabled false -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'File and Printer Sharing'\|Set-NetFirewallRule -Enabled false -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#▲It will look like this when File and Printer Sharing is disabled.

#Enable Network Discovery In Windows 10 Without Using the netsh Command In PowerShell

#It is as simple as enabling the pre-configured rule in Windows Firewall to enable Network Discovery in Windows 10 but using netsh is the old fashion way.

#Run just this one command in an elevated PowerShell prompt to enable Network Discovery for the Private and Domain profiles but not Public

Get-NetFirewallRule -DisplayGroup 'Network Discovery'|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'Network Discovery'\|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#The Longer Story…

#Enabling the Network Discovery services it what makes the Network icon (formally My Network Places) work properly. These commands all work in both PowerShell and PowerShell Direct.

#Get Firewall rules for Network Discovery

#This command shows the individual rules and the network connection profiles that are explicitly enabled and disabled for Network Discovery.

Get-NetFirewallRule -DisplayGroup 'Network Discovery'|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'Network Discovery'\|select Name,DisplayName,Enabled,Profile\|ft -a

#Enable Network Discovery for Private and Domain network profiles

#Enable the Network Discovery service for the Private and Domain network profiles by applying the preconfigured Windows Firewall group rule called Network Discovery by typing this:

Get-NetFirewallRule -DisplayGroup 'Network Discovery'|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'Network Discovery'\|Set-NetFirewallRule -Profile 'Private, Domain' -Enabled true -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#▲It will look like that in the GUI setup when Network Discovery is enabled.

#Set all network connection profiles to `Private``.`

Set-NetConnectionProfile -NetworkCategory Private -PassThru

1	Set-NetConnectionProfile -NetworkCategory Private -PassThru

#Disable Network Discovery for all network profiles

#Run this command to disable Network Discovery on all network profiles if you do not wish to keep the service available.

Get-NetFirewallRule -DisplayGroup 'Network Discovery'|Set-NetFirewallRule -Enabled false -PassThru|select Name,DisplayName,Enabled,Profile|ft -a

1	Get-NetFirewallRule -DisplayGroup 'Network Discovery'\|Set-NetFirewallRule -Enabled false -PassThru\|select Name,DisplayName,Enabled,Profile\|ft -a

#▲It will look like that in the GUI setup when Network Discovery is disabled.